Rotary Drum Granulator

Rotary Drum Granulator2020-12-12T14:06:48+08:00

Rotary Drum Granulator ist eine Art von Dedizierter Düngermaschine Hergestellt aus Shunxin. Es kann organische und zusammengesetzte Materialien gemäß den Anforderungen der Kunden in Granulat verwandeln. Diese Art von rotierenden Trommelgranulationsmaschine kann in großem Maßstab in großem Maßstab in Produktionsstätten mit organischen und zusammengesetzten Düngemitteln verwendet werden.
Was ist mehr, durch Adoption nasse Granulationsmethode, Die Rotationsgranulationsgeräte haben eine starke Anwendbarkeit auf verschiedene Rohstoffe. Mit offenem Design an beiden Enden, es kann kontinuierlich funktionieren, Dadurch erreicht die Maschine Massenproduktion.

Warum die meisten Leute, die sich für SX Rotary Drum Granulatoren auswählen, wählen?

Verschiedene Arten von Drum -rotierenden Granulator.

1. Spitze3 Trommelgranulatoren in Shunxin -Maschinen

Als professioneller Granulator -Gerätehersteller, Wir entwerfen verschiedene Arten von Drumtrommelgranulator, Das Folgende ist eine kurze Einführung von ihnen:

Nass Rotary Drum Granulator zum Verkauf
Der Überblick über die shunxin -rotierende Drum -Granulationsmaschine
  • Der erste ist Rotary Drum Sulfur Granulatoren.

Schwefel Dünger ist besonders gut für die Proteinabsorption durch Pflanzen. Aber wegen der inkompakten Struktur von Schwefel, Es ist nicht einfach, hochwertige Schwefeldünger -Granulat zu produzieren. Dieses Problem zu lösen, Shunxin -Drum -Trommelschwefel Granulator vergleichbar Special Granulationsteile. Das von unserer rotierende Granulationsmaschine erzeugte Schwefeldünger -Granulat hat eine kompakte Struktur und einen hohen Ernährungswert. Und diese Art von Granulator war schon immer unser Bestseller.

  • Der zweite ist die NPK -Düngemittel Drum Granulationsmaschine.

NPK -Dünger ist immer eine Art wichtiger Dünger für das Pflanzenwachstum. Als Düngerhersteller, Die Herstellung hochwertiger Dünger kann Ihre Wettbewerbsfähigkeit zwischen Ihren Kollegen erheblich verbessern, Das ist ein guter Weg, um Ihnen hohe Gewinne zu bringen. Unsere NPK -Drum Granulationsmaschine ist berühmt für ihre feine Qualität und ihren günstigen Preis. Mit fortschrittlichem Design, Der von unserem Drum Granulator produzierte NPK -Dünger hat sich immer gut verkauft.

Drehdrumgranulator Lieferung
Drehung der Trommelgranulationsgeräte laden
  • Der letzte ist Kalkstein -Drum Granulationsausrüstung.

Kalkstein kann den pH -Wert des Bodens ausgleichen. Wie wir alle wissen, Wenn das Gleichgewicht des Bodens pH -Wert gebrochen ist, Die Pflanzen werden nicht gut wachsen, dann verursacht schlechte Ertrag. In letzter Zeit Jahre, Immer mehr Menschen verwenden Kalksteindünger, So produzieren Sie hochwertige Kalksteindünger -Granulate können Ihnen ein wunderbares Einkommen bringen. Verwenden von SX -Kalkstein -Drum -Drum -Granulator, Die endgültigen Pellets hätten kompakte Struktur mit hohem Nährstoffgehalt.

Was ist Ihr Dünger -Rohstoff?? Wir werden Ihnen die rücksichtsvollsten Vorschläge geben.

2. Wie viele Modelle gibt es für verschiedene Skalen der Düngemittelproduktion?

Um die unterschiedlichen Anforderungen der Kunden gerecht zu werden, Wir haben entworfen 3 Scales Drum Granulator:

Kleines Maßstab:

Für kleine Maßstäbe Produktionslinie für zusammengesetzte Dünger, Es gibt zwei Modelle des rotierenden Granulators könnten Ihre Entscheidungen sein. Der erste kann produzieren 1-3 Tonnen Düngerkörnchen pro Stunde und kostet nur 5,5 kW/h. Der zweite ist 3-5T/h und kostet 11 kW/h. Es ist leicht zu wissen, dass diese beiden Modelle die Kapazität für kleine Düngemittel -Making -Linien übereinstimmen und niedrige Energie verbrauchen.

Mittelschwer:

Wie für mittlere Skala, Sie können SXZGZ-1870 oder SXZGZ-2080 wählen. Ihre Kapazität ist zwischen 5 und 15t/h. Ihre Kraft ist niedriger als 18,5 kW/h. Im Vergleich zu anderen Unternehmen, Wir perfektionieren unsere Ausrüstung immer, um den Verbrauch zu verringern und die Kapazität zu verbessern. Unser mittlerer Drum -Granulator ist besser für Ihre Wahl als andere geeignet.

Großes Maßstab:

Wir haben einen großen rotierenden Drum-Granulator, um Ihr Bedürfnis nach großer Tonnage zu erfüllen. Seine Länge beträgt 10 m, und der Durchmesser der Trommel ist 3.2 Meter. Das riesige Erscheinungsbild mit hocheffizienten Maschinenteilen macht den Drum -Granulator hervorragende Kapazität. Bis zu 30 t/h Kapazität, Unser großer Drum -Drum -Granulator kann effizient für Ihre großen Düngemittel -Fabrik funktionieren.

Modell Leistung(KW) Durchmesser(mm) Länge(mm) Installationswinkel(°) Drehzahl(r/min) Kapazität(t/h)
SXZGZ-1240 5.5 1200 4000 2-5 17 1-3
SXZGZ-1560 11 1500 6000 2-5 17.5 3-5
SXZGZ-1870 15 1800 7000 2-5 11.5 5-8
SXZGZ-2080 18.5 2000 8000 2-5 11 8-15
SXZGZ-3210 37 3200 10000 2-5 9.5 15-30

Klicken Sie hier, um detailliertere Informationen zu verschiedenen Modell -Drum -Granulatoren zu erhalten.

Wie entwerfen wir einen hochwertigen Rotationstrommelgranulator??

Die granulierende Trommel besteht aus einer Zeit ohne zu viele kleine Zubehör aus Gewinderohr. Es kann viele Wartungskosten senken. Die einfache und praktische Struktur mit ausgezeichneter Korrosion und Abriebfestigkeit und ist nicht leicht deformiert und gebrochen zu werden, damit der Granulator Sie für eine lange Zeit dienen kann.

Spezielle Auskleidungswand der Drehdrumgranulationsmaschine
Hohe Dicke und Härtestahl, die für unseren Rotationstrommelgranulator verwendet wird

Innerhalb der Trommel, Wir verwenden eine spezielle Gummifutter oder eine säurefeste Edelstahlfutter. Im Vergleich zu dem herkömmlichen Schabergerät, das in anderen Maschinenfirmen verwendet wird, Unser Drum -Granulator kann realisieren, die Narbe automatisch an der inneren Wand der Trommel zu entfernen. Reduziert effizient die Paste und Korrosion der Trommel -Innenwand durch Dünger. Es spart auch die Arbeit, die für die Reinigung benötigt wird.
Der andere ist unsere Maschinenklasse. Wegen des enormen Aussehens und des großen Gewichts des Drum -Granulators, Die Halterung muss langlebig und in hoher Härte sein. So we weld medium carbon steel plates and channels to ensure their high quality. And it has passed strict quality control and special process requirements. Endlich, all parts are combined together and formed the excellent granulator.

How to make sure high granulating rate of rotary drum granulator?

What are the advantages of ShunXin rotary granulating machine?

Because of the special simple structure, you don’t have to care much about small parts during use. Firm bracket helps the granulating drum run smoothly and steadily. Special inner lining materials we adopt significantly prolongs the service life of drum granulating machine.

Wie oben erwähnt, we adopt advanced technology and reasonable design, the low power consumption and high economic benefit reduce the cost of production. In der Zwischenzeit, there is no Tri-wastes in the granulation process. That not only in line with today’s advocacy of green production, but also can take the pressure away of you to deal with waste.

producing of ShunXin rotary drum granulator
SX Wet Rotary Drum Granulator In The Process Of Compound Fertilzier Production Line

The drum with open ends can produce fertilizer granules directly, and you can keep adding raw materials even it is working. Auf diese Weise, it can granulate continuously and save you a lot of granulation cost. With high granulating rate about 70%, the granules produced by our rotary granulator has compact structure, high hardness in 15-20N, and uniform size.

How to choose your ideal rotating drum granulating machine?

How does this granulating machine make granules?

Our rotating drum granulator mainly consists of a motor, a belt pulley, reduction gears, big gear ring and a drum. When the granulator begins granulating, the main motor drives the belt pulley, which are driven to the driving shaft by the reduction gears, and works in opposite direction with the big gear ring. Then the raw fertilizer will be added into the drum from feed port.

Durch eine bestimmte Menge Wasser oder Dampf, the base fertilizer is fully reacted in chemical way after being wet in the drum body; then through the special structure inside the drum granulator, the raw material is made into pellets, and finally flows out through the outlet. To dispose the return materials, Wir haben Screening -Maschine to screen them out and return them into the rotary drum granulator again. Auf diese Weise, the fertilizer materials utilization rate greatly improves.

How to maintain the rotating drum granulator when it’s not in use?

To make sure the granulator has stable efficiency and longer working life, the cleaning and maintenance is very important when it’s not in use. So how to maintain the machine correctly and economically? As an experienced equipment supplier, we will give you some helpful suggestions.

1. Cleaning the inner wall after granulating

If your fertilizer materials have high stickiness or corrosiveness, they are very easy to stick to the inner wall and even cause damage. To help you clean the sticking fertilizer materials easily, we designed cleaning holes on the drum surface. You can use a hammer to knock the exposed lining wall through the holes. The fertilizer will fall down with the lining wall vibration. We can also equip the equipment with automatic hammers, that will save you lots of time and energy.

2. Daily maintenance of machine parts

The basis of maintaining fertilizer granulator is to make sure the working environment is clean and dry, without strong acid and corrosive substance. That will greatly reduce the damage from water, dust and corrosion. If the machine can’t work for a long time, you need to oil the important working parts (bearings, motor, gearing, usw) regularly to prevent rust.

3. Check the machine condition before use

Before using the granulator, it’s very necessary to check important parts of the machine. Only make sure that all parts are normal can the machine start to work. If there is something wrong before or during working, the operator needs to stop the granulator to find out causes and maintain the machine timely.

SX Rotary Drum Granulator Fertilizer Making Plant

Why the price of our rotary drum pelletizer is reasonable?

We have our own factory to produce fertilizer making machine, and we sell the equipment directly from factory. Without extra price, our drum granulator price is always more affordable. Ansonsten, we have a professional team devotes to the improvement of machine’s quality, performance and working life. And we invest heavily in technological innovation to provide you high performance but low cost machines. Using our rotary drum granulator can save you a lot of costs and bring you better economical profits.

If you want to know more about our rotary drum granulator or other machines, welcome to contact us. And we will provide you the most considerate help.

    Wenn Sie Interesse oder Bedürfnisse unseres Produkts haben, Fühlen Sie sich einfach frei, uns eine Anfrage zu senden!

    Ihr Name *
    Ihre Firma *
    E-Mail-Adresse *
    Telefonnummer
    Rohstoffe *
    Kapazität pro Stunde*

    Kurze Einführung in Ihr Projekt?*

    *Wir respektieren Ihre Privatsphäre, und wird Ihre persönlichen Daten nicht an andere Unternehmen weitergeben.

    What causes high temperature of rotary granulator bearing?2020-12-01T17:16:10+08:00

    Rotary Drum Granulator is an important machine in compound fertilizer making factories, which is used for large scale fertilizer materials granulating. Besides compound fertilizer granulating, it also can be used for organic fertilizer manufacturing line. But we learned some customers found the problem of high temperature of the gearing. That may affect the performance of the whole machine. So what are the reasons? And how to solve this problem?

    Bearing Circle of Rotary Drum Granulator

    Anfangs, the lubricating oil is insufficient. The lack of lubricating oil will lead to the increase of friction between bearing and the machine, which will cause excessive temperature. So adding enough lubricating oil before using the granulator is very important.

    Zweitens, if the lubricating oil is not clean, the bearing will be affected by dust. With the increasing dust, the gearing becomes rough. So the temperature of the gearing will rise continuously and burn down. If the fertilizer making environment is nor clean, this problem will be more serious. So the cleaning of the bearing and factory environment is very important.

    Thirdly is the damage caused by long-term use. If the granulator is used for a long time, the parts may be aged, and the damage is inevitable. So when the parts are damaged, it’s better to replace them in time. That not only can prolong the granulator working life, but also can make sure the high performance to bring you wonderful profits.

    The last reason may be unreasonable installation. Under normal conditions, the bearing is on the center line of the granulator. If you install the machine by mistake, the bearing temperature rising is obviously. To help you make fertilizer efficiently, we can provide you free installation guidance. If the problem can’t be solved, we can also arrange our technician to your site.

      Rotary Drum Granulator Fertilizer Making Plan2020-12-01T17:21:21+08:00

      Rotary Drum Granulator is the most typical large scale wet granulating machine. So the fertilizer producing factories with rotary granulator always has excellent capacity. If you want to build a large scale fertilizer making factory, the drum granulator fertilizer producing plant is really suitable.

      This kind of fertilizer making process not only can be used for organische Düngemittel machen, but also is suitable for compound fertilizer manufacturing. For making organic fertilizer granules, the whole plant consists of manure dewatering machine, large size composting machine, rotary pelletizer, fertilizer drying equipment and granules packing machine.

      Verbunddünger produzierende Fabrik

      As for rotary drum granulator compound fertilizer factory, you don’t need to buy the composting machine. But the crushing equipment may be helpful. It can crush the raw materials into small particles, which makes the granulating process more smooth.

      All the machines in our rotary granulator fertilizer making plant is made by high performance parts and hard metal materials. Low cost on maintaining makes the whole plant more efficient and bring you higher economical profits. By wet granulating method, the final fertilizer granules have round performance and fine structure. If you want to get more beautiful fertilizer balls, we can equip you polishing machine, rotary screening machine or coating machine. If you don’t know how to make reasonable layout, we can provide you free layout and installing guidance.

        Characteristics of Rotating Drum Granulating Machine2020-12-01T17:24:04+08:00

        As an efficient organic fertilizer granulating machine, the pelletizing rate of Drum -Drum -Granulator can reach 90%, and the it’s easy to operate and maintain. The specific advantages are as follows:
        1. Increase the material temperature during the operation of the drum granulator, so that the moisture content of the material after pelletizing is low and the drying efficiency is improved.
        2. The drum granulator is lined with rubber engineering plastics, so the raw materials are not easy to stick to the cylinder, and have the function of anti-corrosion and heat preservation.
        3. Ultra high molecular weight polyethylene is used to build the inner lining of granulator equipment, which eliminates the phenomenon of material sticking to the wall and reduces the labor intensity of workers.
        4. The drum granulator has large capacity, low power consumption, low maintenance cost and long service life.

        ShunXin rotary drum granulating machine has great efficiency and quality, choosing it, you will make fertilizer much easier.

          Gehen Sie nach oben