Bälttransportör är den nödvändiga utrustningen i en komplett gödningsfabrik. Det kan se till att hela växten fungerar smidigt och är grunden för hög effektivitet. Så underhåll av gödningsmedelstransporter är mycket viktigt. Så vilka saker som måste beaktas när du använder gödningsmedelstransporter?
1.Bältet ska hållas rent under användning och lagring, Undvik direkt solljus eller regn och snö, förhindra kontakt med syra, alkali, olja, organiskt lösningsmedel och andra ämnen, och vara en meter bort från uppvärmningsanordningen.
2.Lagerets temperatur bör hållas mellan 18-40 ℃ och den relativa fuktigheten bör hållas mellan 50-80 ℃. Under lagringsperioden, transportbandet måste placeras i rullar istället för vikta.
3.Olika typer, Specifikationer och lager av transportband bör inte anslutas ihop, and the fixed unloading device should be used at low speed.
4. The feeding direction should be along the running direction of the conveyor belt. In order to reduce the impact of material falling on the conveyor belt. The distance between idlers should be shortened and buffer idlers should be used in the receiving section of conveyor belt.
5. The running speed of rubber conveyor belt shall not be greater than 5 m/s. When transporting large block size and high wear resistance materials, the conveying should be at low speed. If the speed exceeds the specified speed, the service life of the belt will be affected;
6. Attention should be paid to the following matters during the use of conveyor belt:
- Avoid the idler being covered by materials, resulting in inflexible rotation, prevent material leakage stuck between the drum and the belt, pay attention to the lubrication of the moving part, but do not grease the conveyor belt;
- Before turning on the machine, it’s necessary to make sure there is nothing on the conveying belt;
- If the conveyor belt deviates or broke, the operator need to repair it in time;
- The conveyor belt shall be prevented from being blocked by the frame, pillar or block material to prevent breakage and tearing.